Kinco FD5P Series User Manual

Preface and Product Confirmation
Thank you for using Kinco FD5P series of servo products.
FD5P series AC servo is an economical product launched by Kinco for the general servo market, with
a power range between 200W to 3KW. The new generation servo products support CANopen,
EtherCat, Modbus, Profinet and other communication protocols. The servo products can be widely
used in logistics, 3C electronics, printing and packaging, textile machinery, woodworking machinery,
lithium batteries and new energy automobile industry.
Please read the manual carefully and follow the operating instructions, it can help you set up the
drive correctly and make the drive perform optimally.
The accessories of different models of Kinco FD5P series drives are different. We
recommend that you confirm the product carefully before use.
Confirmation
 Please confirm whether the product is damaged during transportation
 Please confirm the motor model, drive model, and motor wiring model are consistent with
the model you ordered according to the nameplate information on the drive and motor.
 Please confirm whether the terminal accessories of the drive is complete, and the motor oil seal and
keys are complete on the drive.
Product Model
Accessories with Quantity
FD415P-CA-000
FD415P-LA-000
FD415P-EA-000
FD425P-CA-000
FD425P-LA-000
FD425P-EA-000
Main power terminal (including auxiliary wiring tools)*1,
D-sub36P plug*1, certificate*1, service guide*1,
desiccant*1
If there is any problem with any of the above, please contact Kinco or your supplier to solve it.

Kinco FD5P Series Specifications

General

Brand	Kinco
Model	FD5P Series
Category	Controller
Language	English