Operating Instructions PT 2500 E english / Release 1.0 / 01.12.2009 page 10 of 26
Service technician:
The service technician bears the responsibility for the “system/equipment danger area”. He
ensures that the system/equipment is at all times free from technical faults, safe and
functions correctly.
2.2.6 GENERAL SAFETY RULES
Observe the following general safety rules:
follow these operating instructions,
in addition, observe the legal obligations and requirements for accident prevention and
environmental protection of the country in which you operate the equipment,
do not make any modifications to the equipment without the written authorisation of the
manufacturer,
only original replacement parts may be used for repairs,
before any service work on the equipment, it must be ensured that the electrical supply
is switched off,
after any service, maintenance or repair work has been carried out on the
system/equipment, it must be given a test run by the service technician.
depending on the place at which it is installed, circumstances may require that hearing
protection is worn when remaining in the vicinity of the equipment for long periods.
2.3 RESIDUAL DANGERS
When the system/equipment is used in accordance with rules and regulations, residual
dangers are minimal.
Residual danger Countermeasures
Tripping over feed or
return lines
These should be laid appropriately.
Breakage of glass
containers
Wear protective clothing
(goggles etc.).
Spitting of the product
Hearing loss due to loud
noise.
According to the application
ear protection must be used.
Tilting of the device Use stable, non-slip base and the safety stands from
KINEMATICA
To Next Page
Loading...