Operating Instructions PT 2500 E english / Release 1.0 / 01.12.2009 page 7 of 26
2 SAFETY
This chapter is directed at all users of KINEMATICA laboratory equipment. It includes
information on safe and optimum use.
2.1 SUMMARY
Any incorrect use of the installed equipment can be dangerous. Inadequately trained users
can cause material damage and personal injury. This chapter informs you about the safety
concept and the requirements for safe and optimum use of the equipment.
All those authorised to operate, service and repair the equipment are required to study
chapter 2, “Safety”.
2.2 SAFETY CONCEPT
The safety concept sets down the entitlement to use the equipment and the responsibilities
of the individual users.
The machines and equipment are designed and constructed according to the state of the
art and the recognised safety rules.
2.2.1 INTENDED USE OF THE EQUIPMENT
The equipment is designed and constructed for the following use:
Dispersion and homogenisation of pumpable fluid products in accordance with the
technical specifications (see point 3.5) and compatibility with the materials coming
into contact with the products.
If you use the equipment for any purpose other than those listed, the manufacturer cannot
be held liable for any resulting damage.
2.2.2 IMPROPER USE
Any use other than the “intended use” without the written approval of the manufacturer or
any operation outside the technical limits of use is improper use.
To Next Page
Loading...