Operating Instructions PT 2500 E english / Release 1.0 / 01.12.2009 page 26 of 26
7 ACCESSORIES
A large selection of special homogenising vessels is available, which can improve the
efficiency of the processing of your product. Closed vessels to withstand vacuum or
pressure can also be supplied.
Ask your dealer or contact KINEMATICA AG directly.
.
8 WARRANTY
KINEMATICA AG guarantees that their equipment will run free of any fault related to
materials or manufacturing faults for 24 months.
If thorough testing shows a fault to be due to either of the above causes, KINEMATICA AG
guarantees that the equipment will be repaired or replaced free of charge.
The warranty does not cover parts that are subject to normal wear. It is void if any person
other than an employee of KINEMATICA AG or their appointed representative has made
modifications to the equipment or if the damage is due to failure to comply with the
operating instructions, to carelessness, accident, incorrect use or incorrect supply voltage.
KINEMATICA AG reserves the right to make technical changes to the equipment without
modifying equipment delivered earlier in the same way.
In the event of technical problems, for spare parts requirements or for advice, contact our
regional appointed agent, your prefered dealer or us directly at:
KINEMATICA AG
Luzernerstr. 147a Tel. +41-41-259 65 65
CH-6014 Luzern Fax +41-41-259 65 75
SWITZERLAND eMail laboratory@kinematica.ch
To Previous Page
Loading...