Kinematica POLYTRON PT 2500 E - Page 12

Operating Instructions PT 2500 E english / Release 1.0 / 01.12.2009 page 12 of 26
 The equipment may not be operated in explosive areas
 It is not allowed to work with fluids which are highly
inflammable.
 It is not allowed to mix materials which can cause strong
exothermal reactions
 THE DEVICE MAY ONLY BE OPENED BY
AUTHORISED KINEMATICA SERVICE STATIONS.
 Ensure that enough free space is available at the
backside of device, so that effective air flow and cooling
is assured. Insufficient cooling may lead to a decrease of
power output.
 The device has to be placed in a manner that dirt or
fluids cannot penetrate through the ventilation slots at
back side of the drive.
 POLYTRON

dispersion aggregates may not be
operated dry – the lower sleeve bearing is cooled and
lubricated by the medium being processed. Running dry
will destroy the sleeve bearing.
 The dispersing aggregates should be cleaned after
every operation.
 Never pull the coupling during operation – the aggregate
could fall out of the coupling.
 When the line cord is plugged, never touch the saw teeth
of the aggregate – danger of injuries due to rotating
shafts and blades
 KINEMATICA AG products comply with all the usual CE
directives,
carry the CE marking and are delivered with a
corresponding
declaration of conformity.