R ev . 11/ 20 10 P a g e 2 P r od uc t N o . 14 19 7
Parts Identification
Safety
Owners Manual
Installation
Instructions
Softener Assembly
Includes:
control module
main and remote tanks
tank connectors
connector bracket
connector bracket pins
located inside cabinet models:
2020CHF
Cabinet, standard, commercial
Close or remove PVC containers and other
flammable materials to prevent fire or
explosions.
Provide proper ventilation when using PVC
cleaner or glue.
Use a scorch pad to protect any surface that
may be exposed to a torch flame or excessive
heat.
Use only LEAD FREE solder.
Wear protective eyewear while installing to
prevent potential eye injury that could be caused
by splattering soldering materials or
metal/plastic shavings.
When installing a plastic component, install
grounding straps BEFORE the lines are actually
cut to ensure that the ground is never broken.
Use a ladder for all work overhead beyond your
natural reach. If working continuously at a
height of six feet or more, employ the
appropriate safety devices.
Read all steps, guides and rules carefully
before installing and using the Kinetico
Softening System
Mach Control Valve
2025s
2060s
2060s OD
Included with these systems:
Inlet / Outlet Adapters
Adapter E-clips
Inlet / Outlet O-rings
To Next Page
Loading...
Need help?
General
