Need help?Do you have a question about the Kinetico gold 15759 and is the answer not in the manual?
General| Brand | Kinetico |
|---|---|
| Model | gold 15759 |
| Category | Water Dispenser |
| Language | English |
Recommends using pure soap products, clear liquid soaps without dyes and perfumes for soft water.
Advise to reduce soap and cleaner amounts by half or more when using soft water for better results.
Describes the 'slippery' feel on skin and hair after bathing/shampooing with soft water.
Suggests reducing or eliminating fabric softeners as they are less necessary with soft water.
Advises precautions for automatic dishwashers to prevent etching glassware with soft water.
Provides guidance on watering plants and caring for fish with soft water.
Explains the process of hard water flowing through the resin to produce conditioned water.
Details the Brine/Slow Rinse, Backwash, and Brine Tank/Cabinet Refill stages of regeneration.
Ensures salt level is above water and recommends quality pellet salt, not rock salt.
Specifies an inlet water pressure range of 25-125 psi for effective valve operation.
Recommends checking for and replacing plumbing with lime/iron buildup.
Stresses the importance of including a system by-pass during installation.
Step-by-step guide on how to manually initiate the regeneration process.
Highlights cautions regarding water pressure, temperature, and freezing conditions.
Advises precautionary measures for units installed in unheated or outdoor areas.
Outlines the process for sanitizing the system after installation or extended non-use.
Addresses potential causes for a reduction in home water pressure.
Explains why the system might regenerate more frequently due to water usage.
Provides steps to verify proper regeneration and when to contact a dealer.
Clarifies that Kinetico softeners regenerate on demand, not on a fixed schedule.
Explains how to check the salt level and when to add more salt.
Confirms soft water is safe for drinking and notes the presence of added sodium.
Fields for recording installation details like hardness, iron, pH, TDS, temperature, and pressure.
To Next Page