Using the Code Reader
CODE RETRIEVAL PROCEDURE
D900 CanScan 26
complete the Preliminary Vehicle Diagnosis Worksheet on page 27 and
take it together with the retrieved codes, freeze frame data and LED
information to aid in the troubleshooting procedure.
¾ To prolong battery life, the CanScan automatically shuts “Off”
approximately three minutes after it is disconnected from the vehicle. The
DTCs retrieved, Monitor Status and Freeze Frame data (if any) will remain
in the CanScan’s memory, and may be viewed at any time by turning the
unit “On”. If the CanScan’s batteries are removed, or if the CanScan is
relinked to a vehicle to retrieve codes/data, any prior codes/data in its
memory are automatically cleared.
To Next Page
Loading...