3.
During the procedure turn outbound the
deviation bar shows pictorially that the
aircraft is flying away from the Localizer
centerline at a
45"
angle on a selected
heading of
283"
4.
Now you have reset the heading select bug
to 103"
and made a
180"
turn
to
this heading.
This
103"
heading will intercept the front
course. You must now reselect Approach
mode by depressing the APPR button on the
Mode Controller. The PNI clearly pictures the
course you are
to
intercept and the angle
of
interception. APPR ARM mode has been
selected
so
that automatic capture of the Lo-
calizer will occur.
37
To Next Page
Loading...
