1.
Approaching the STL VORTAC, the con-
2.
Halfway through the outbound turn, the
troller asks you
to
hold southwest of the
KI
525A display shows the deviation bar
VORTAC on the 244" radial, right turns.
You
behind the symbolic aircraft.
You
know,
are now over the station with a 064" course therefore, that you must eventuallyfly back
to
selected (the
TOlFROM
indicator has swung the radial in order
to
be on course during the
to
"FROM").
Set your heading bug
to
the re- inbound leg of the holding pattern.
ciprocal or outbound heading of 244" for
easy reference and begin your right turn
holding pattern.
3.
Outbound, you are using the heading bu
as a reference for 244". The 244" radial is
08
the right wing and parallel
to
your outbound
course.
4. Halfway through your turn
to
the inbound
064"course, the
KI
525Ashows the symbolic
aircraft approaching the deviation bar at
a
right angle. By keeping the top of the devia-
tion bar on the lubber line, you can complete
your turn and roll out precisely on course.
NOTE: For system limitations refer to your
Flight Manual Supplement.
14
To Next Page
Loading...
