KING KFC 200 - System Weight and Power Requirements

System Weight and Power Requirements
KFC 200 Flight Director/Autopilot
KAP 200 Autopilot System
Com nents for 2-axis system.
KG55A Silver Crown ComDass System
KG 258 Gyro, panel-mounted
KC
295 Flight Computer with Adapter
KS 270 Pitch Servo wlKM 275
KS 271 Aileron Servo wlKM 275
KA 285 Mode Annunciator
KC 292 Mode Controller
KS 272 Trim Servo wlKM 276
Card
KS 270 Pitch Servo wlKM 275
KS 271 Aileron Servo wlKM 275
KA 285 Mode Annunciator
KC 290 Mode Controller
KS 272 Trim Servo wlKM
MountlCapstan MountlCapstan
MountlCapstan MountlCapstan
MountlCapstan MountlCapstan
TOTAL
FOR 2-AXIS SYSTEM
TOTAL
FOR 2-AXIS SYSTEM
28 3
Ibs. (12.9 kg) 14Vl15.5 AMP
28V19 5 AMP 28Vl8.7 AMP
28.1
Ibs. (12.9 kg) 14Vl14.7 AMP
Additional Components for 3-axis system:
Additional Components for 3-axis system:
KS 271 Rudder Servo wlKM 275
KC 291 Yaw Controller
KC 296 Yaw Computer
KRG 331 Yaw Rate Sensor
TOTAL
FOR 3-AXIS SYSTEM
32 8
Ibs. (15.0 kg) 14Vl18.1 AMP
KS 271 Rudder Servo w1KM 275
KC
296 Yaw Computer
KRG 331 Yaw Rate Sensor
MountlCapstan MountlCapstan
TOTAL
FOR 3-AXIS SYSTEM
32.6
Ibs. (1 4.9 kg) 14V118.1 AMP
28V111.5 AMP
The third axis may be installed with or without
the KC 291 Yaw Mode Controller.
28Vl11.5AMP