Page 1
TABLE OF CONTENTS
2
3
3
4-5
5
6
8-11
12
12
12-13
14
15
PRODUCT REGISTRATION
To provide ongoing technical support and to better
facilitate warranty processing, please register your product at
kingconnect.com/products/product-registration.
IMPORTANT!
The KING Quest Pro will work with non-SWM receivers, and select SWM-only receivers (see page 2). The use
of SWM-only receivers requires SWM hardware (sold separately - see page 6).
printing. If your KING Quest Pro does not operate as outlined in this manual, please call KING
®
at
kingconnect.com. KING is not responsible for changes outside of its
control.
To Next Page
Loading...
