8
GENERAL INFORMATION
The models in this manual have been designed and made exclusively for the distribution of
solid, granular fertilizers and seeds. It is not designed to spread anything else.
These seeders are usually used during the daylight hours. If you are required to use it at
night with poor visibility, you will need to use the lighting from your tractor or the equipment
you have the seeder attached to see properly.
Any modification made to this seeder relieves the manufacturer from any responsibility for
damages to seed, operator or any third party involved.
NAME PLATE
On every seeder there is a name plate bar code that shows the model, serial number and
UPC number for your seeder. When spare parts are needed it is necessary to be able to
provide Model and serial number to ensure the correct parts.
CHARACTERISTICS OF THE SEEDER
The hardness of the steel welded frame together with the life of the hoppers, let’s you
obtain the highest quality level of seeders. The paint is epoxy varnish with successive
baking at 150° Celsius (302° F) with the application of a primer bath, assuring great
protection and long life of the seeder.
To Next Page
Loading...
Need help?
General
