Spark Plug.
1.Drain off all the run –in machine oil from
the oil tan k.
2.Di smount the rel ated parts.
3.Wash clean all the related parts.
4.Fill in the required oil.
＊ Thi s j ob shoul d not be done by untrai ned
persons but shall be done at an authorized servi ce
center. 1.Remove the cap of spark plug and screw off
the spark plug by the plug wrench.
2.Cl ean the spark plug all aroud or repl ace it
i f i t i s corroded or there i s too much deposit on i t.
3.Regul ate the gap of the spark plug to 0.6-
0.7mm.
4.The spark plug of the desi gnated type shoul d
be used. The appli cabl e type of spark plug: NHSP
LD D8TC mad e in China.
To Next Page
Loading...
