M46O737A
There are marks indicating the fuse
capacity and location on the cover of
the fuse panel. Replace the fuse ac-
cording to the following procedure:
1. Turn the key switch to the "OFF"
position and turn "OFF" all the
electrical devices.
2. Open the fuse box cover and check
the fuse in question using fuse
tongs.
(1) Fuse Storage Case (2) Fuse
H11O655A
3. If the fuse is blown, replace it with
a new fuse with same capacity.
Make sure it is rmly installed.
4. Install the fuse box cover.
Never use a fuse with the ca-
pacity higher than specified
on the fuse box cover.
If using a faulty fuse, steel
wire, or foil, the electrical de-
vice can be damaged or even
can catch a re.
WARNING
If the replaced fuse blow, it is
probable that the wiring sys-
tem is faulty. In this case, con-
tact your local KIOTI Dealer.
If the fusible link, relay or
other electrical component is
faulty, contact your local KIOTI
Dealer.
NOTE
To Next Page
Loading...
Need help?
General
