Kioti DK40 - Hi-Lo Shift Lever; Creep Speed Lever; How to Use Creep Speed

4-14 DK35/40/450L
2. Prohibited uses
• Using creeping speed to escape from
dampened soil.
• Towing and trailing works
• Frontal loader works
• Frontal snowplow works
• Engineering works.
3. Observance
• To shift the gears, fully depress the
clutch pedal.
• Before driving off, release the park-
ing brake.
Depending on the structure arrangement
of Main shift lever, Hi-Lo shift lever, creep
speed lever and forwards and reverse
lever, you can shift into 16-forwards and
16-reverse speeds.
CAUTION
To stop the tractor, be sure to
disengage the clutch first, then
depress the brake pedal. This is
because creep range gives high
torque at low forward speeds
thus making braking ineffective.
To avoid any hazards, do not con-
vert from forwarding gear to re-
versing gear and vice verse while
driving.
HI-LO SHIFT LEVER
615O428A
You can shift into “High” range or “Low”
range of speed.
To shift into high or low range, completely
stop the tractor and depress the clutch.
If you attempt to shift while driving, it may
cause damage to the transmission.
(1) Hi-Lo shift Lever
(A) Low Speed (B)High Speed
CREEP SPEED LEVER
615O429A
(1) Creep Speed Lever(Option)
(A) Low Speed (B)High Speed
HOW TO USE CREEP SPEED
If you misuse or mishandle the creeping
speed, it may cause damage to the unit,
so please note the following.
1. Permissible uses
• Deep and narrow cultivating with ro-
tary cultivator.
• When you can not cultivate hard
ground with standard speed during
rotary cultivation.
• Transplanting
• Works with agricultural trencher.
• When loading and unloading goods.
CR MODEL, DK450L-EU