Kioti DK40 - Clutch Pedal; Parking Brake Lever

DESCRIPTION OF OPERATING SYSTEM 4-17
615O435A
When the clutch pedal is fully depressed,
the clutch is disengaged. Shift the main
shift lever to the desired speed and
gradually release the clutch pedal, then
the clutch will become engaged.
The clutch should be disengaged by step-
ping on the pedal quickly, and engaged
by slow releasing the foot from the pedal
so as not to damage the clutch plate.
CLUTCH PEDAL
(1) Clutch Pedal
IMPORTANT
The clutch pedal must be quick-
ly disengaged and be slowly en-
gaged.
Never operate the tractor with
your foot resting on the clutch
pedal. Doing so may contribute to
premature clutch wear.
615O436A
PARKING BRAKE LEVER
(1) Parking Brake Lever
(A) Lock
1. To set the parking brake;
• Interlock the brake pedals
• Depress the brake pedals
• Latch the brake pedals with the park-
ing brake lever.
2. To release the parking brake, depress
the brake pedals again.
1. To set the parking brake, pull the brake
lever up.
2. To release the parking brake (push in
the button and release the lever).
615O437A
(1) Parking brake lever
(A) Lock
(B) Release
(USA, AU TYPE) (EU TYPE)