OPERATING 5-11
7. Release the parking brake.
8. Change the main and Hi-Lo shift, and
forward and reverse lever shuttle le-
ver to the position you want.
9. The tractor starts to move if you take
away the clutch pedal slowly.
615O512A
(1) Parking Brake Lever
(A) Lock
8. Change the main and Hi-Lo shift, and
forward and reverse lever shuttle le-
ver to the position you want.
9. The tractor starts to move if you take
away the clutch pedal slowly.
615O513A
(1) Main shift Lever
(2) Hi-Lo Shift Lever
CAUTION
Do not put one of your feet on the
clutch while driving. If you put it,
the clutch stays in the slip posi-
tion, and as a result it wears quic-
kly.
As for the clutch operation. You
should take away the clutch quic-
kly, and connect it slowly.
Avoid sudden speed change for
the safety.
Before moving the tractor, take
care of the front and back, and
left and right direction. If you are
careless about it, you may have
injury.
When driving on the steep slope,
loading and unloading something
to or from the vehicle, entering
and going out of the job field, driv-
ing over the ridge way, please do
not drive with your hand off from
the main shift lever. If you change
gears halfway, it is dangerous.
Therefore, you should put the
gears in the low speed position
in advance.
If you must shift gear in inevitable
condition, step on the clutch and
brake pepal to the full. After the
tractor has stopped.
Shift to desires gear.
EUUSA, AU
To Next Page
Loading...
