(1) Cap (2) Connector
2. Remove the cap.
3. Press and turn the socket coun-
terclockwise to remove the bulb. If
the bulb is blown, replace it with a
new bulb with the same capacity.
td2O739A
WARNING
If using a bulb other than the
specied one, the lamp can be
damaged and the tractor can
even catch re.
Make sure to use bulbs with
the specied capacity.
•
•
CAUTION
Make sure to use a KIOTI genui-
ne bulb. Using a non-recommen-
ded bulb can cause a re.
The headlamps can tempo-
rarily be fogged due to rain
or car wash. This is because
of the temperature difference
between the inside and outside
of the lamp, which is normal.
•
•
REAR TURN SIGNAL LAMP AND
POSITION LAMP
td2O740A
(1) Turn Signal Lamp
1.
The rear turn signal lamps are moun-
ted on the rear fender.
To Next Page
Loading...
