DISCONNECTION
1. Make sure to stop the engine be
-
fore disconnecting implements.
2. Release any residual pressure in
the hydraulic hoses of the imple-
ment and tractor by operating the
double acting valve lever 4 to 5
times.
3. Re mo ve a ny f or eig n ma te ri al
around the couplers.
4. L o w e r t h e i m p l e me n t o n t h e
ground or remove any external
load applied to the implement. Dis-
connecting hoses while outer load
is applied to the implement is very
difcult and dangerous dueto the
pressurizeduidinthehose.
5. Remove the male coupler by push
-
ing the female coupler boss back-
ward.
6. Close the dust-proof cover of the
female coupler. Wrap the male
coupler of the implement with a
plastic bag to prevent contamina-
tion.
Never connect or disconnect
the implement hydraulic hose
while the pressure in it is not
released or the engine is run-
ning. It is hard to connect and
disconnect the hose and hy-
draulic fluid can be sprayed
from the hose, and get into
your eyes or skin.
Stop the engine and wear pro-
tective glasses and gloves be-
fore work.
•
•
WARNING
To Next Page
