PTO SWITCH
(1) PTO Switch
(A) - "ON" (B) - "OFF"
ON Off
The PTO switch is used to supply
power from the tractor to the imple-
ment.
Make sure to put this switch into
the "OFF" position before starting
the engine. Otherwise, the engine
cannot be started.
To avoid personal injury and ac-
cident:
Before disassembling or clean-
ing the PTO sy ste m, m ake
sure that the PTO switch is in
the "OFF" position, the engine
is stopped, and all parts are
stopped.
Always keep the PTO driving
part clean. Also, check the
PTO cover is closed while PTO
is in operation.
Disengage the PTO while driv-
ing the tractor on the public
road.
Be ca re fu l no t t o ge t y ou r
hand, foot, cloth, or hair into
any driving part while the PTO
is in operation. You can be se-
verely injured or killed!
M a k e s u r e t h a t n o o n e i s
around the tractor and imple-
ment while the PTO is in op-
eration.
CAUTION
T11O465A T11O4A34
ROPSCABIN
(1) PTO Switch
(A) - "ON" (B) - "OFF"
ON Off
The rear PTO rotates at 540 rpm
when the engine speed is approx.
2,444 rpm.
To Next Page
Loading...
