SPEED LIMIT SWITCH
This speed limit switch
is to maintain
the operating speed constant.
In this case, the speed limit lamp in
the cluster meter.
TE3O437A
NOTE
W h e n w or ki n g i n a n a rr ow
space, turning the switch “ON”
with the HST forward driving
pedal depressed can maintain
the constant speed. Depressing
the pedal to its deepest position
does not accelerate the vehicle,
but still maintains the speed con-
stant in the “ON” position.
•
TE3O436A
CRUISE CONTROL SWITCH
To activate the cruise control function,
set the desired speed and press the
switch to the “ON” position.
In this case, the speed limit lamp in the
cluster meter.
Depress the HST pedal to increase the
driving speed in order to accelerate at a
constant speed. To deactivate the cruise
function, depress the brake pedal or
press the switch to the “OFF” position.
The cruise function is not activated dur-
ing reverse.
To Next Page
Loading...
