This switch is to switch between the
automatic and manual PTO opera-
tions. In the manual operation, the
PTO rotates regardless of the height
of the implement. In the automatic
operation, the PTO stops rotating as
the implement is raised.
PTO SELECTION SWITCH
(1) PTO Selection Switch
(A) AUTO (B) MANUAL
DPF REGENERATION SWITCH
Tf1O402A
(1) DPF Regeneration Switch
(A) Activation (B) Deactivation
ACTIVATION (UPPER BUTTON)
Perform the following procedure
when the regeneration warning lamp
comes on :
1. Park the vehicle on level ground
2. Run the engine at the idle speed.
3. Depress the brake pedal and lock
it in place.
4. Do not depress the clutch pedal.
5. Run the engine 3 to 4 minutes.
Then, press the regeneration button
over 2 second.
T11O4A51
(1) PTO Selection Switch
(A) AUTO (B) MANUAL
ROPS
Tf1O401A
CABIN CABIN
To Next Page
Loading...
