(7)
TABLE OF CONTENTS
Chapter 1 Before Use
Page
1. 1 Installation Requirements 1- 2
1. 2 Originals Prohibited from Duplication 1- 3
1. 3 Features 1- 4
1. 4 Specifications 1- 5
1. 5 Appearance 1- 7
1. 5. 1 Front 1- 7
1. 5. 2 Rear 1- 8
1. 6 Optional Configurations 1- 9
1. 7 Specifications for Printing Media 1-10
1. 7. 1 Available Print Size 1-10
1. 7. 2 Media not to be used 1-11
1. 7. 3 Maintaining Media 1-12
1. 7. 4 Environmental Condition - Correction 1-13
Chapter 2 Basic Operations
Page
2. 1 Turning on KIP 7900 2- 2
2. 2 Turning off KIP 7900 2- 4
2. 3 Replacing Roll Media 2- 5
2. 4 Replacing Toner Cartridge 2-13
2. 5 Placing Cut Sheet Media 2-17
2. 6 Canceling Sleep Mode 2-18
2. 7 Dehumidifying Roll Media 2-19
2. 8 Stacking Prints on High Capacity Print Tray (option) 2-21
Chapter 3 Error Corrections
Page
3. 1 Paper Jam 3- 2
3. 1. 1 Roll Deck Section (J-01, J-02, J-03, J-04) 3- 3
3. 1. 2 Manual Feeder Section (J-05) 3- 5
3. 1. 3 Paper Feeder Section (J-10, J-11, J-12) 3- 6
3. 1. 4 Fuser Section (J-13, J-14) 3- 9
3. 1. 5 Outer Device (J-21, J-22) 3-16
3. 2 Open Cover Errors 3-17
3. 2. 1 Roll Deck Open 3-17
To Next Page
Loading...
