KIPI eSTER_x40 Series - 7 User Menu - Structure

8
7 User menu - structure
Boiler settings
Preset boiler temp.
Weather contr.boiler*
• Heating curve*
• Curve shift*
• Room temp.factor*
Output modulation
• MAX boiler output
• MAX blow-in output
• Average hysteresis H2
• Aver. boiler output
• Average blow-in output
• MIN hysteresis H1
• MIN boiler output
• MIN blow-in output
• Boiler hysteresis
• Min. boiler output FL*
• Max. boiler output FL*
• Blow-in output-grate*
• Feeder:
- Feeder efficiency
- Feeder test
- Fuel dose from test
Boiler oper. mode*
• Pellet, Grate
Regulation mode
• Standard, Fuzzy Logic
Fuel type*
Fuel level
• Alarm level
• Fuel level calibration
Burner cleaning
Cleaning intensity
HUW settings*
Preset HUW temp.
HUW pump mode
• Off, Priority, No priority
HUW cont. hysteresis
HUW disinfection
Night time decrease
Boiler, HUW container, Mixer, Circulation
pump*
• Off
• Reduction value
• Schedule
Sommer/Winter
SUMMER mode
• Summer, Winter, Auto*
Activ. temperature SUMMER
Deactv. temperature SUMMER
Mixer settings 1-2*5
Preset mixer temp.
Mixer room thermostat
Weather control mixer*
Heating curve mixer*
Curve shift*
Room temp. factor*
General settings
Clock
Screen brightness
Screen contrast
Alarms sound
Touch sound
Language
WiFi*
Weather sensor
• Sensor type:
- None, CT6-P, CT4-P
• Sensor correction
* not available if proper sensor or additional
module not connected or the parameter is
hidden.
Main menu
Information
Boiler settings
HUW settings*
Mixer 1-2 settings*
Night time decrease
Summer/Winter
Operation with schedule
• On, Schedule
General settings
Manual control
Alarms
Service settings