Kipor IG2000 User Manual

3.3 Checking for the low oil alarm
1. Disconnect oil alarm connector when the engine is still running, connect the two plugs, be sure that oil
alarm lights and engine stops.
2. Stop engine, disconnect oil alarm connector, check the connector conduction, no conduct is normal.
3. Drain out the oil inside engine and check the conduction, conduct is normal.
22

Kipor IG2000 Specifications

General

Rated Power	1.6 kW
Voltage	230 V
Frequency	50 Hz
Fuel Type	Gasoline
Starting System	Recoil
Weight	22 kg
Engine Type	4-stroke, OHV
Noise Level	54-59 dB(A)
Continuous Operation Time	4 h (at rated load)