Kipor IG2000 User Manual

8.2 Installation of recoil starter
(1) Set the spring into the starter reel, and hang the spring outer hook inside the reel groove.
(2) Smear lubrication grease on the starter outer shell claw, install the starter reel. Revolve the reel
anticlockwise to hang the spring inner hook on the starter outer shell claw.
(3) Make a “8” knot at one end of the rope, pass the other end through the reel hole. Wind the reel
anticlockwise 4 turns to fix the reel.
46

Kipor IG2000 Specifications

General

Rated Power	1.6 kW
Voltage	230 V
Frequency	50 Hz
Fuel Type	Gasoline
Starting System	Recoil
Weight	22 kg
Engine Type	4-stroke, OHV
Noise Level	54-59 dB(A)
Continuous Operation Time	4 h (at rated load)