9
for those who appreciate quality, reliability & performance
CAUTION:
BeforechangingtheDisposableFilterBag,unplugthepowercord
from the wall outlet and be sure that the motor and fan have stopped.
!
Getting Started
Getting Started
Installing/Changing Disposable Filter Bags
INSTALLING/CHANGINGDISPOSABLE
FILTERBAGS
ADisposableFilterBagmustbeinstalledbeforeyoubegin
vacuuming.
ToinstallanewDisposableFilterBag,unziptheOuter
PermanentBag
o
1andpullouttheDisposableFilterBag
along with the Top Adaptor
o
5 . ➤
Whennecessary,removetheusedDisposableFilterBag.
NOTE:AlwaysreplacetheDisposableFilterBagwhen
dirt reaches the “FULL” line on the bag. Failure to do
so will affect performance.
FromtherearoftheDisposableBag,graspthecardboardface-
plate.HoldingtheTopAdaptorsteady,rotatethecardboard
faceplate to the left (counter-clockwise). When the lock tabs
on the Top Adaptor align with the slots in the cardboard face-
plate, gently pull the bag off. ➤
ToinstallanewDisposableFilterBag,graspthecard-
board faceplate from the rear of the Disposable Filter
bag. Align the slots in the cardboard faceplate on the
DisposableFilterBagwiththelocktabsontheTop
Adaptor. Then push the Top Adaptor into the bag opening.
HoldingtheTopAdaptorsteady,rotatethecardboardfaceplate
totheright(clockwise)tosecuretheDisposableFilterBag.
NOTE: To avoid air leaks, make sure the cardboard faceplate is
securely positioned up against the flat portion of the Top
Adaptor. ➤
1
2
3