Kirby G Series User Manual

20
The Kirby Company
DUSTERBRUSH
TheDusterBrushmaybeconnectedtotheAttachment
HoseortheExtensionTubestoremovedustfromany
surface, including contoured or irregular surfaces. ❏
UPHOLSTERYNOZZLE
The Upholstery Nozzle is used for cleaning upholstered fur-
niture, carpeted steps, clothing and inside of cars. ❏
CREVICETOOLWITHREMOVABLEBRUSH
Without the removable brush, the Crevice Tool can be used
for cleaning cracks, crevices, corners, grooves and narrow
openings.
Install the removable brush in the end of the Crevice Tool to
remove dirt from corners, button tufts, between radiator coils
and sliding window tracks. ❏
WALL&CEILINGBRUSH
To vacuum walls, ceilings, drapes and other surfaces, attach
theWall&CeilingBrushtotheSuctionControlGrip(shown
on page 21). Then attach the Suction Control Grip to the
Extension Tube(s) as shown. In addition to providing suction
relief, the Suction Control Grip provides the proper angle to
comfortably vacuum walls and ceilings.
Tip: To vacuum the top of door frames or ledges, or books on
abookshelf,rotatetheWall&CeilingBrush180°.
NOTE: You may also wish to use the Suction Control Grip
as shown on page 21. ❏
CanisterCleaner&Attachments
CanisterCleaner&Attachments
Using the Attachments

Kirby G Series Specifications

General

Type	Upright
Filtration	HEPA
Bagged/Bagless	Bagged
Warranty	3 years
Category	Vacuum Cleaner
Attachments	Crevice tool, upholstery tool, dusting brush