Kirisun PT6500 - Page 12

PT6500 User’s Manual
Page 12 of 30
Set power level (high/middle/low):
1. As shown: in CH 1 , press
, utilities is shown.
2. Press to enter select mode,
3. Press / , then Power Level is shown,
4. Press to select, e.g., Power Low,
5. Change the power level with
/ , then press to confirm.
Set Companding：
1．As shown: in CH 1 , press
, utilities is shown.
2. Press to enter select mode,
3. Press / , and Companding is shown,
4. Press to select Companding,
5. Select On or Off by / , press to confirm.
Set saving：
1．As shown: in CH 1 , press
, utilities is shown.
2. Press to enter select mode,
3. Press / , and Save is shown,
4. Press to select Save 1：4,
5. Chang the save percentage with / , press to confirm.
Set scrambler：
1．As shown: in CH 1 , press
, utilities is shown.