ENGLISH
USING THE STAND MIXER ATTACHMENT | 11
USING THE STAND MIXER ATTACHMENT
ASSEMBLING THE FOOD GRINDER ATTACHMENT
1
Insert the small grind worm into the
grinder body.
2
Place the knife blade over the square
shank at the exposed end of the
grind worm.
3
Place grinding plate over the knife,
matching the tabs of the plate with
the notches on the grinder body.
4
Place the ring on the grinder body,
turning by hand until secured but not
tightened.
NOTE: The combination food pusher/wrench is used for removal of the ring only. To
avoid damage to the attachment, do not use the combination food pusher/wrench to
tighten the ring to the grinder body.
NOTE: A Fruit and Vegetable strainer is available to convert the Food Grinder to
a Fruit and Vegetable Strainer. A sausage stuffer is available to convert the Food
Grinder to a sausage stuffer.
W10863933A_01_EN_v09.indd 11 9/25/17 3:52 PM
To Next Page
Loading...
