KitchenAid 5KFC3516 - Assembling and Running the Mini Food Processor

ENGLISH
USING THE MINI FOOD PROCESSOR | 13
USING THE MINI FOOD PROCESSOR
1
Be sure the Mini Food Processor
is unplugged� Start with the work
bowl handle facing front on the
base� Rotate the handle 90°
counterclockwise to lock into place�
When assembled properly, the handle
will face the right side�
2
Fit the blade over the shaft in the
centre of the work bowl, rotate
and press down until it locks into
position�
3
Place ingredients to be processed
inside the work bowl� For uniform
consistency of processed foods, cut
fruits, vegetables, and meats into
1inch pieces�
4
Place the lid on the work bowl with
the lid handle facing front� Rotate
the lid handle to the right� The lid
will click when locked into place�
Rotate the lid counterclockwise
to lock into place�
ASSEMBLING AND RUNNING THE MINI FOOD PROCESSOR
IMPORTANT: Do not process coffee
beans or hard spices such as nutmeg,
which may damage the Mini Food
Processor�
NOTE: The work bowl and lid must
be locked into place for the Mini Food
Processor to operate�
W10860735A_01_EN_v12.indd 13 9/14/16 3:42 PM