12
MAINTENANCE
To maintain properly (annually or after
50 uses), we recommend using a light
mineral oil to lubricate the gears.
Add a drop of mineral oil to each
of the 4 corners of the Pasta Roller
and Cutters.
CARE AND CLEANING
TROUBLESHOOTING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
If your Stand Mixer should malfunction or
fail to operate while using the Pasta Roller
and Cutter Attachment, please check the
following:
1. Is the Stand Mixer plugged in?
2. Is the fuse in the circuit to the Stand
Mixer in working order? If you have a
circuit breaker box, be sure the circuit
is closed.
3. Turn off the Stand Mixer for
10-15 seconds, then turn it back on.
If the Stand Mixer still does not start,
allow it to cool for 30 minutes before
turning it back on.
4. Did you use the correct speed for the
Pasta Roller and Cutters as suggested
in the “Roller Settings Chart?”
5. Did you attach the Pasta Roller or
Cutter Attachment properly as shown in
the “Product Usage” section?
6. Did you follow the usage instructions
as described in the “Product Usage”
section?
7. Is your dough prepared according
to the recipe?
If the problem is not due to one
of the above items, see the “Terms of
KitchenAid Guarantee (“Guarantee”)”
section.
Do not return the Pasta Roller and Cutter
Attachments or the Stand Mixer to the
retailer, as they do not provide service.
W11499080A.indb 12W11499080A.indb 12 12/23/2020 5:07:43 PM12/23/2020 5:07:43 PM
To Next Page
Loading...
