22
CARE AND CLEANING
COOKTOP SURFACE
After Each Use:
To preserve the finish, clean food spills containing acids, such
as vinegar and tomato, as soon as the entire appliance is cool.
SEALED SURFACE BURNERS
Use a straight pin. Do not enlarge or distort the port. Do not use
a wooden toothpick. If the burner needs to be adjusted, contact
a trained repair specialist.
1.
Wipe off cooktop, grates, and caps.
2.
Clean food spills.
1.
Remove burner cap and base.
2.
Wipe off cooktop, grates, and caps.
3.
Clean clogged burner ports.
Make sure alignment pins are properly aligned with burner cap.
If the burner does not light, check cap alignment. If the burner
still does not light, do not service the sealed burner yourself.
Contact a trained repair specialist.
4. Replace burner cap.
5.
Turn ON burner.
Dual-Flame Burner
Medium Burner
Simmer/Melt Burner
1
Incorrect
2
Correct
1
Incorrect
2
Correct
1
Incorrect
2
Correct
1
1
1
2
2
2
To Next Page
Loading...
