30" (76.2 cm) and 36" (91.4 cm) Models
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
48" (121.9 cm) Models
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 50 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Disconnect power. 3. Add power supply cord strain relief.
2. Remove the terminal block cover screws and disengage • Assemble a UL listed strain relief in the opening.
mounting tabs to remove terminal block cover from back of
range.
I A
€
A. Phillips head screws
B. Terminalblock cover
C. Twomounting tabs at bottom
A. UL listed strainrelief
• Tighten strain relief screw against the power supply cord.
4.
Complete installation following instructions for your type of
electrical connection:
4-wire (recommended)
3-wire (if 4-wire is not available)
12
To Next Page
Loading...
Need help?
General
