39
Appendix D
New Generation Stand Mixer Screw Torques
The assembly torque values for the screws in the mixer are as follows:
Column to Base screws 80 in. lbs.
Column to Lower Housing screws 80 in. lbs.
Motor to Lower Housing screws 25 in. lbs.
Ring Gear to Ring Gear Mounting Bracket 40 in. lbs.
Transmission Housing to Ring Gear Plate mounting screws 25 in. lbs.
Control Board mounting screws 25 in. lbs.
Control Board Guide 25 in. lbs.
Grounding screw 25 in. lbs.
RFI Filter mounting screw (Euro) 25 in. lbs.
Upper Housing to Lower Housing screw 25 in. lbs.
Trim Band retaining screw 10 in. lbs.
Bowl retaining clip screw 25 in. lbs.
Note: All values +/- 10%DJP
To Previous Page
Loading...
