22
USING YOUR ACCESSORIES
Installing/removing the egg whip* or dough blade
3
After processing, firmly grasp egg whip
or dough blade and lift straight up.
1
Place the egg whip or dough blade onto
power shaft.
2
Press down firmly on the egg whip or
dough blade. You will hear a click when
the accessory locks into place.
* Available with select models only.
IMPORTANT: Discs and adapters must be removed before removing bowls.
W10545030B_ENv3.indd 22 1/25/13 10:53 AM
To Next Page
Loading...
