Installing/removing the citrus press*
1
Place the citrus press adapter onto the
power shaft.
2
Place the strainer basket in the work
bowl with the locking clip positioned to
the left of the work bowl handle.
5
After processing, lift cone from strainer
basket, turn strainer basket to unlock
from the handle, as shown, and lift from
the work bowl. Remove the adapter.
4
Place the cone inside the strainer
basket, connecting it to the adapter. It
may be necessary to rotate the cone
until it drops into place.
3
Turn the basket counter-clockwise until
the clip locks into the handle.
USING YOUR ACCESSORIES
* Available with select models only.
IMPORTANT: Discs and adapters must be removed before removing bowls.
W10545030B_ENv3.indd 23 1/25/13 10:53 AM
To Next Page
Loading...
