Fixing the camera to a vented helmet
1. Fix the camera to the Mount Clip (i).
2. Thread the supplied straps through the slots in a flat or
curved Adhesive Mount (don’t remove the adhesive film) (ii).
3. Attach the camera assembly to the strap mount assembly
by sliding it in until it clicks into position.
4. After fixing the camera to the mount correctly, use the strap
to fix it to the helmet. Adjust the length according to the
helmet’s size, and then push the clips down into position
to lock the straps in place.
(i)
(ii)
C
4140
To Next Page
Loading...
