Kitvision explore 1080p - Connecting the Camera

30 31
Connecting the camera to an HDTV
1. Connect the Micro HDMI end of a micro HDMI to HDMI cable (not included)
to the camera’s Micro HDMI port (14), and the other end to the HDTV’s
HDMI port.
2. Turn on the HDTV and select the appropriate HDMI source.
3. Followtheinstructionsfor‘Playbackofles’mentionedearlierinthismanual.
4. Whenviewingisnished,turnothecameraandHDTVbeforeremoving
the HDMI cable.
Connecting the camera to a PC
Therearetwowaystodownloadlesfromthecamera’smicroSDtoacomputer:
•By inserting the micro SD into a card reader
•By connecting the camera to a computer using the supplied micro USB cable
Connecting the camera to a PC with the USB cable
1. Connect one end of the supplied USB cable to the camera’s micro USB
port (6), and the other end to the PC’s USB port and turn the camera on.
2. Turn on the camera, a ‘Connecting’ prompt will appear on the LCD screen.
3. Open [My Computer] or [Windows Explorer®] on your PC. ‘Removable Disk’
will be in the drive list. Double-click the ‘Removable Disk’ icon to view its
contents. Files stored on the camera are located in the folder named ‘DCIM’.
4. CopythelesthatyouwanttoyourPC.