Klarstein 10009348 - Page 17

Menu
Itisusedtosetdierentprograms.Eachtimeitispressed(accompaniedbyashortbeep)theprogram
willvary.Pressthebuttondiscontinuously,the12menuswillbecycledtoshowontheLCDdisplay.Select
your desired program. The functions of 12 menus will be explained below.
1. Basic:kneading,riseandbakingnormalbread.Youmayalsoaddingredientstoincreaseavor.
2. Whole wheat: kneading, rise and baking of whole wheat bread. It is not advised to use the
delay function as this can produce poor results.
3. French: kneading, rise and baking with a longer rise time. The bread baked in this menu will
have a crisper crust and loose texture.
4. Quick: kneading, rise and baking loaf within the time less than Basic bread. But the bread baked
on this setting is usually smaller with a dense texture.
5. Sweet:kneading,riseandbakingsweetbread.Youmayalsoaddingredientstoaddavor.
6. Cake: kneading, rise and baking, but rise with soda or baking powder.
7. Jam: boiling jams and marmalades. Fruit or vegetables must be chopped before putting it into
the bread pan.
8. Dough: kneading and rise, but without baking. Remove the dough and use for making bread
rolls, pizza, steamed bread, etc.
9. Ultra fast: kneading, rise and baking loaf in a short time, bread with a dense texture.
10. Bake: only baking, no kneading and rise. Also used for increasing the baking time on selected
settings.
11. Dessert: kneading, rise and baking dessert.
12. Home made:Canself-programbycustomer,toresetkneading,rise,baking,keepwarmevery
step time.
The time range of each program as following:
KNEAD1:6-14minutes
RISE1:20-60minutes
KNEAD2:5-20minutes
RISE2:5-120minutes
RISE3:0-120minutes
BAKE:0-80minutes
KEEPWARM:0-60minutes
UnderthemenuofHomeMade,
a. PressCYCLEbuttononce,KNEAD1willappearonLCD,thenpressTIMEbuttontoadjustthe
 minutes,andpressCYCLEtoconrmthetimeforthisstep;
b. PressCYCLEtoenterthenextstep,RISE1willappearonLCD,andthenpressTIMEbuttonto
 adjusttheminutes,thenumberwillincreaserapidlyifTIMEbuttonisholding.Furtherpress
 CYCLEtoconrm.
c. Inthiswaysettheremainingsteps.Uponnishingsettingforallsteps,pressStart/stopbutton
to exit the setting.
d. Press Start/stop button further to activate the operation.
Note:thesettingcanbememorizedandiseectiveinnextuse.
16 17