28
Always lift pans off the Induction hob – do not slide, or they may scratch the glass.
Usage
To start cooking
1. Touch the ON/OFF control. After power on, the buzzer
beeps once, all displays show “ – “ or “ – – “, indicating
that the induction hob has entered the state of standby
mode.
2. Place a suitable pan on the cooking zone that you wish
to use. Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touching the heating zone selection control an
indicator next to the key will flash.
4. Select a heat setting by touching the “-“ or “+” control.
If you don’t choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at step 1.
You can modify the heat setting at any time
during cooking
To Next Page
Loading...
