Klarstein Glacial - Installation; Water supply and drainage connection

22
EN
INSTALLATION
Note: The device must be installed by a competent person in accordance with the
operating instructions. Incorrect installation may result in property damage and/or
personal injury.
• Keep the ice maker in an even location and the power cord can be plugged
directly into the socket.
Water supply and drainage connection
Note: In regions with high calcareous water content, we recommend the use of a
water lter to maintain the functionality of the appliance. Replace it regularly.
• Usually, there is equipped with a water inlet pipe and a corrugated drain pipe
as a standard conguration in the unit. The standard conguration of the machine
installation and connection diagram is as follows:
Connect to drain pipe
Connect water pipe
Power cord