28
EN
Fault Inspection Cause Solution
Less or thin ice
cubes
Condenser Excessive fouling
of the condenser
results in poor
air intake, high
condensation
temperature, and
long ice making
time
Clean the
condenser.
Filter The lter is
clogged, causing
poor water ow.
Clean or replace
the lter.
Water pump Pump failure
caused poor
water ow.
Replace the water
pump.
Ambient
temperature
Ambient
temperature is too
high.
Place the machine
in a room with
an appropriate
temperature.
Air inlet Poor air pressure
leads to high
condensation
temperatures and
long ice making
times.
Keep a distance
of at least 15 cm
to the left and
right sides and the
rear.
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/
EU this symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product, please
contact your local council or your household waste disposal
service.
To Next Page
Loading...
