32
EN
Suspend function
Touch the suspend button , a beeping sound will be heard. The suspend control
lamp lights up and the cooking zone display (5) shows the following and is ashing:
The hob will interrupt operation until you press the suspend button again to put the
hob back into operation. It will continue working at the functions set before.
Notes on setting the power level, temperature and timer
1. If the control lamp of a cooking zone above the cooking zone display (5) is
ashing, you can set the power level, temperature and timer for this cooking zone.
If you do not want to set this cooking zone, do not make any settings here. Instead,
you can select a different cooking zone with the power level button or the
temperature button .
2. The power setting is shown on the cooking zone display (5). When you set the
temperature, the cooking zone display (5) shows “C” and the temperature display
(8) shows the set temperature.
3. After you have set the temperature or power level, touch the timer button to set
the timer while the cooking zone control lamp above the cooking zone display (5)
is still ashing. The timer setting and the set temperature are shown alternately on the
timer/temperature display (8).
4. If “E0” is shown on the cooking zone display (5), the induction hob has not
detected any ferromagnetic metal cookware, which means that the cookware used
is unsuitable. Use cookware made of ferromagnetic metal.
CAUTION
Risk of burns! The accessible surfaces of the appliance can become
very hot during operation.
To Next Page
Loading...
