EasyManua.ls Logo

Klarstein TrinityCook Hybrid - Protection Functions

Klarstein TrinityCook Hybrid
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
EN
PROTECTION FUNCTIONS
Over-temperature protection
The appliance is equipped with a temperature sensor device to monitor the temperature
inside the hobs. When an excessive temperature is detected, both the Induction Hob
and the Hi-Light Ceramic Hob will stop increasing temperature automatically.
Detection of small articles (Induction Hob)
When the Induction Hob detected the existence of a pot which is less than 80mm in
diameter or small articles (e.g. knife, fork, forceps, key, etc.) or non-magnetic pots (such
as aluminium or bronze pot), the buzzer can gives out an alarm lasting about 1 minute.
In case user has not put proper pot in time, the Induction Hob shall automatically switch
to standby mode.
Residual heat after use
When the hob is used for a long period of time, heat remains in the heating zone for a
few minutes.
Auto shutdown protection
Auto shutdown is a safety protection function of the appliance. If not turned-off after
120minutes, it will shuts down automatically.
When pot is removed, the induction hob shall stop heating immediately and shut down
after 1 minute of buzzer sound.

Table of Contents

Related product manuals