Need help?Do you have a question about the Klein + Hummel O 810 and is the answer not in the manual?
General| Type | Active subwoofer |
|---|---|
| Output Connectors | XLR |
| Input Connectors | XLR |
| Enclosure Type | Bass reflex |
| Driver Size | 10-inch |
| Bass driver | 10-inch long throw |
Lists items included in the product packaging.
Guidance on choosing the appropriate subwoofer for different system needs.
Illustrates the signal flow for the 7.1 Bass Manager.
Visual representation of the subwoofer's rear panel connections and controls.
Explains the function and settings of the crossover filter.
Details power connection, voltage selection, and remote power functions.
Describes the specifications and features of the analog input stage.
Details the capabilities of the optional digital input module for various audio formats.
Describes the output stage, including high-pass filtering and sum output.
Explains bass management, filtering, acoustical controls, and signal generator functions.
Details the four different modes for processing the LFE channel.
Explains connection and functionality of remote control interfaces.
Describes the amplifier technology and configuration for the models.
Discusses the drivers and how they contribute to the subwoofer's sound.
Describes the physical construction and finish of the subwoofer cabinet.
Information on relocating the electronics panel using accessories.
Guidelines for operating the subwoofer in various environments and conditions.
Recommendations for optimal placement of loudspeakers and subwoofers in different systems.
Discusses configurations for using one or multiple subwoofers.
Illustrates analog wiring scenarios for system setup.
Illustrates digital wiring scenarios for system setup.
Explains creating a Plane Wave Bass Array with multiple subwoofers.
Details the analog filters used to compensate for room acoustics.
Guides on adjusting controls for optimal in-room response and system integration.
Recommended settings for subwoofer in-room response based on location.
Methods for aligning subwoofer phase with main loudspeakers.
Process for setting absolute acoustic levels using a sound level meter.
Explains system volume control options and switch settings.
Instructions for controlling the subwoofer via RS-232 interface.
Recommendations for cleaning the subwoofer's electronics and cabinet.
Detailed technical data including acoustics, electronics, inputs, outputs, and mechanics.
Presents measurement data for frequency response, group delay, distortion, and SPL.
Lists available accessories and optional modules for the product.
Information on the REK 2 kit for remote electronics placement.
General safety instructions and warnings for product use.
Recommendations for routine maintenance and user-level servicing.
Instructions for environmentally responsible disposal and recycling.
Statement of compliance with EU directives.
To Next Page
