Klein Tools 93LDM200 - General Specifications

2
GENERAL SPECIFICATIONS
The Klein Tools 93LDM200 is a 200' (60.96 m) Laser Distance
Measure featuring area, volume, and indirect measurements.
• Operating Altitude: 6562 ft. (2000 m)
• Charging Temperature: 32°F to 113° F (0°C to 45°C)
• Operating Temperature: 32°F to 104° F (0°C to 40°C)
• Storage Temperature: 14°F to 140° F (-10°C to 60°C)
• Laser: 500-550 nm, ≤1mW, Class 2 Laser Product
• Accuracy: ±0.063" (±1.6 mm) for distances ≤ 32.8' (10m)
±0.125" (±3.2 mm) for distances > 32.8' (10m)
• Battery Type:
Internal Li-Ion, 5V DC, 800 mAh (2.96 Wh)
• Battery Life: 5+ Hours (on full charge)
• Auto-Off: Laser: 30 seconds
Device: 3 minutes
• Memory/Storage: 30 stored readings
• Dimensions: Unit only:
4.61" × 2.05" × 1.14" (117 × 52 × 29 mm)
With case: 4.74" × 2.29" × 1.56" (120 × 58 × 40 mm)
• Weight: Unit only: 4.9 oz. (139 g)
With case: 6.03 oz. (171 g)
• Calibration: Calibrated for accuracy at factory
• Ingress Protection: IP54 Dust & Water Resistant
• Drop Protection: 6.6' (2 m)
• Standards/Certi cations: CE, UKCA, ROHS, REACH, DOE/CEC,
NRCan, EN 60825-1:2014/A11:2021, EN 50689:2021.
Complies with: 21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1 Ed. 3, as described in
Laser Notice No. 56, dated May 8, 2019.
Specifications subject to change.
ENGLISH