Klein Tools ET270 - Warranty; Customer Service

12
BATTERY REPLACEMENT
When the Low Battery Indicator
I
is displayed on the LCD, the
batteries must be replaced.
1. Loosen captive screw and
remove battery door.
2. Replace two AAA batteries
(note proper polarity).
3. Replace battery door and
fasten securely with screw.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
customerservice@kleintools.com www.kleintools.com
CLEANING
Be sure tester is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when tester is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the tester to
return to normal operating conditions before using.
FCC & IC COMPLIANCE
See this product’s page at www.kleintools.com
for FCC compliance information.
Canada ICES-003 (B) / NMB-003 (B)
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with
local regulations. Please see www.epa.gov/recycle for
additional information.
T o avoid risk of electric shock,
disconnect leads from any voltage source
before removing battery door.
To avoid risk of electric shock, do
not operate tester while battery door is
removed.
ENGLISH