klover BI-FIRE MID - Page 64

4
LEFT UPPER VIEW
The thermo stove is delivered with the following equipment:
 USE, INSTALLATION AND MAINTENANCE GUIDE
 1 POWER SUPPLY CABLE;
 1 LARGE STRAIGHT BRUSH FOR CLEANING THE FLUE PIPE;
 1 WOOD SIDE FLUE GAS PASS CLEANING BRUSH;
 1 INFRA-RED REMOTE CONTROL.
MASTER SWITCH, POWER SUPPLY
CABLE CONNECTION AND TWO
INCORPORATED FUSES (4A 250V)
SECURITY THERMOSTAT
MANUAL RESET
ROOM THERMOSTAT
CONNECTION CLAMP
BOILER BODY WATER
DRAIN COCK
FLOW CONNECTION WITH
CHECK VALVE
RETURN
ATTACHMENT
DOMESTIC COLD WATER
INLET (ONLY ON MOD.
WITH SET-UP)
+ SYSTEM LOAD AND
BOILER BODY
BOILING
DISCHARGE
CONNECTION
CIRCULATION KNOB
DOMESTIC HOT WATER
OUTLET (ONLY ON MOD.
WITH SET-UP)
INSPECTION LID
OPENING KNOB
SICURO TOP
HEATING SYSTEM
LOADING COCK
BOILER BODY
LOADING COCK
PALLET SIDE FLUE GAS
PASS CLEANING KNOB
WOOD SIDE
COMBUSTION
REGULATOR
AIR INTAKE PIPE
(PELLET SIDE)
SAFETY VALVE
CALIBRATED
AT 2.5 bar